USG Joint Compound & Spackle

Sheetrock Lightweight Joint Compound 20 18 lb

Sheetrock Easy Sand 20 Lightweight Setting-Type Joint Compound is ideal for heavy fills in drywall interiors and exterior ceiling boards. The compound is lightweight for easy handling and sands easily for fast, smooth finishing. With its low shrinkage and superior bond, it is excellent for laminating drywall and patching plaster surfaces.

• Weigh up to 25% less than conventional-weight setting-type joint compounds
• Sanding ease similar to a ready-mixed, all purpose joint compound
• For best performance, use with USG Sheetrock paper joint tape or fiberglass mesh joint tape
• For interior gypsum panels and exterior gypsum ceilings boards
• Covers approximately 340 sq. ft. per bag
• Meets ASTM C 475
• Check-crack resistance in heavy fills

Sheetrock 380417 Midweight Joint Compound, 4.5 Gallon

• Size: 4.5 gallon
• Ready mixed
• Heavier than lightweight, lighter than all purpose
• Low shrinkage
• Easy sanding
• Boxed

Specifications

Sheetrock 380119-04 All Purpose Joint Compound, 4.5 Gallon

USG Sheetrock® Brand All-Purpose Joint Compounds can be used for embedding tape, finishing second and third coats, and simple hand-applied texturing. This compound combines single-package convenience with good taping and topping performance. The compound features excellent slip, good crack resistance, and low shrinkage for ease in joint finishing. Its excellent bonding properties are retained even under humid job conditions. It is also ideal for skim coating gypsum panel surfaces, laminating gypsum panels in multi-layer partitions and ceilings, and for repairing small cracks in drywall and plaster surfaces.

• Versatile – for all drywall joint finishing steps
• Great bond, hard-finish surface
• Ideal for skim coating
• Pre-mixed compound for minimal mixing, thinning, and re-tempering
• Excellent for embedding paper joint tape
• Recommended for laminating and repairing cracks in interior plaster and masonry not subject to moisture

4.5 Gallon Plus 3 Joint Compound

With up to 25% less weight than conventional-weight compounds, Sheetrock Brand Plus 3 Lightweight All-Purpose 4.5 Gal. Joint Compound features good open time and less shrinkage. It also sands with the ease of a topping compound and bonds like a taping compound. Requiring 1 fewer coat over fasteners and bead, it eliminates the need for taping and topping compounds.

• Pre-mixed compound for minimal mixing, thinning, and retendering
• Bonds like a taping compound
• Sands with the ease of a topping compound
• For best performance, use with USG Sheetrock brand paper joint tape
• Covers approximately 500 sq. ft. per pail
• 4.5 Gal. of pre-mixed joint compound covers 478-47/1 sq. ft.

Easy Sand 45 Joint Compound 18lb

SHEETROCK® Brand EASY SAND™ Lightweight Setting-Type Joint Compounds are chemically-setting compounds for interior gypsum panels and exterior gypsum ceiling boards. These powder compounds mix easily with water and weigh 25% less than conventional setting-type joint compounds for easy handling. They provide sanding ease similar to a ready-mixed, all-purpose joint compound. They allow one-day finishing with next-day decoration to ensure rapid job completion and earlier occupancy. The compounds resist humidity for easy application in damp weather when drying-type compounds would delay job completion. Easy Sand 45 sets in approximately 30-80 minutes. These compounds are also excellent for patching and smoothing interior drywall and concrete surfaces because they provide superior bond, low shrinkage and fast setting-action.

• One-day patching and joint finishing
• 45 minute working time
• Easy mixing, smooth finishing
• Weighs up to 25% less than conventional-weight setting-type joint compounds
• Sanding ease similar to a ready-mixed, all purpose joint compound
• Provides check-crack resistance in heavy fills