3M Tape and Dust masks

Scotch® Rough Surface Painter’s Tape 2060

Scotch® Rough Surface Painter’s Tape has a very strong adhesive designed for performance on rough, non-damageable surfaces. Use on brick, concrete, stucco, or rough wood for the protection you need to get the job done. Scotch® Rough Surface Painter’s Tape is recommended for use with or on lacquer coatings. This tape holds to surfaces for up to 5 days and then removes easily without leaving any sticky residue behind.

• USE-ON SURFACES: Designed for use on concrete, brick, stucco, and rough wood
• CLEAN REMOVAL: 5-day interior and 3-day exterior clean removal leaves behind no damage or sticky residue
• ADHESIVE LEVEL: Very strong
• RECOMMENDED FOR: Use with or on lacquer coatings
• PERFORMANCE: Bonds aggressively, yet has a smooth unwind
• SUSTAINABILITY: Made from 50% renewable resources; Adhesive made with natural rubber; Tape made in a site certified for energy management (ISO 50001 certified); Core made with 70% post-consumer waste
• APPLICATION TIPS: For great paint results make sure the surface is clean, dry, and dust-free so that the tape sticks properly. Next, apply the tape onto the surface while pressing down firmly as you go. And lastly, let the tape set for about 30 to 60 minutes before painting.
• REMOVAL TIPS: Wait until the paint is dry to the touch before removing the tape. Lift it up by slowly pulling it back on itself, then removing at a 45-degree angle.

SPECIFICATIONS

ScotchBlue™ Ultra Sharp Lines Painter’s Tape

ScotchBlue™ Ultra Sharp Lines Painter’s Tape features Advanced Edge-Lock™ Technology that seals out paint to reveal ultra sharp paint lines. This innovative poly-tape is different than standard 3M paper painter’s tapes, it conforms to curves, tears straight for fast cornering, and best of all, removes from the surface without tearing or slivering. Whether you’re protecting your wood trim, painted walls, tile floor, or glass windows, this versatile multi-surface tape can stay on interior surfaces for up to 28 days and then removes easily without leaving any sticky residue behind.

• USE-ON SURFACES: Designed for use on multiple surfaces such as smooth or lightly textured walls, trim, baseboards, tile, and glass
• PAINT LINES: Advanced Edge-Lock™ Technology seals out paint to deliver ultra sharp paint lines
• REMOVAL: Innovative poly-tape provides tear-free removal off the surface and 90-degree snap tear off the roll
• DAYS CLEAN REMOVAL: 28-day interior clean removal leaves behind no damage or sticky residue. Not intended for exterior use
• ADHESIVE LEVEL: Medium
• PERFORMANCE: UV and sunlight resistant
• SUSTAINABILITY: Made from 13% renewable resources; Tape made in a zero-landfill site certified for energy management (ISO 50001 certified), Core made with 70% post-consumer waste
• APPLICATION TIPS: For great paint results make sure the surface is clean, dry, and dust-free so that the tape sticks properly. Next, apply the tape onto the surface while pressing down firmly as you go. And lastly, let the tape set for about 30 to 60 minutes before painting.
• REMOVAL TIPS: Wait until the paint is dry to the touch before removing the tape. Lift the tape up by slowly pulling it back on itself, then removing at a 45-degree angle.
• TAPE REMOVAL TIPS: Wait until the paint is dry to the touch before removing the tape. Lift it up by slowly pulling it back on itself, then removing at a 45-degree angle.

SPECIFICATIONS

3M™ Safe-Release™ Delicate Surface Painter’s Tape 2080SR

3M™ Safe-Release™ Delicate Surface Painter’s Tape is designed for surfaces that require a little extra care such as wood floors, wallpaper, cabinets, painted drywall and freshly painted walls*. With Edge-Lock™ Technology that seals out paint to deliver sharp paint lines, this tape is great for creating accent walls, decorative stripes and patterns. This delicate surface painter’s tape has a gentle adhesive that can stay on surfaces for up to 60 days and then removes easily without leaving any sticky residue behind. *Painted at least 24 hours ago.

• Designed for use on delicate surfaces such as painted drywall, freshly painted walls*, wood floors, wallpaper, veneers and cabinets
• Great for accent walls, decorative stripes or patterns
• Edge-Lock™ Technology seals out paint to deliver sharp paint lines
• 60-day clean removal leaves behind no damage or sticky residue
• Gentle adhesive
• UV and sunlight resistant (intended for indoor use only)

3M™ Safe-Release™ Exterior Surface Painter’s Tape 2097SR

3M™ Safe-Release™ Exterior Surface Painter’s Tape was designed for outdoor painting projects to protect smooth and semi-smooth metal, vinyl, painted wood, and glass. This weatherproof tape can handle wind, rain, humidity, and direct sunlight. This innovative poly-tape is different than standard 3M paper painter’s tapes, it conforms to curves, tears straight for fast cornering, and best of all, removes from the surface without tearing or slivering. 3M Exterior Surface Painter’s Tape holds to surfaces for up to 10 days in all kinds of challenging weather and then removes easily without leaving any sticky residue behind.

• Designed for use on multiple surfaces such as smooth or lightly textured walls, trim, baseboards, tile and glass
• 14-day clean removal leaves behind no damage or sticky residue
• Medium adhesive
• UV and sunlight resistant

SPECIFICATIONS

3M™ Aura™ Particulate Respirator 9205+, N95, 240 ea/Case

NIOSH approved for at least 95 percent filtration efficiency against certain non-oil based particles

Designed to direct exhaled air away from the nose panel, helping reduce eyewear fogging

Curved low profile design conforms well to nose and eye contours, allowing more room for eyewear

SPECIFICATIONS

3M™ Particulate Respirator 8200/07023(AAD), N95 160 EA/Case

NIOSH approved for at least 95 percent filtration efficiency against certain non-oil based particles

Lightweight, disposable particulate respirator is an economical choice for respiratory protection

Adjustable noseclip helps provide a custom and secure seal

Two-strap design with four point staple attachment helps provide a secure seal

SPECIFICATIONS

3M™ Particulate Respirator 8210V, N95 80 EA/Case

Proprietary 3M™ Cool Flow™ Valve helps keeps wearer cool

Cushioning nose foam

Adjustable noseclip helps provide a custom and secure seal

Advanced electrostatic media is designed for ease of breathing

SPECIFICATIONS

3M™ Particulate Respirator 9502+N95

NIOSH N95 approved respirator

3M Proprietary Filter Media. Helps make breathing easier

Adjustable Noseclip that helps provide a custom fit and secure seal

Convenient Flat-fold design

SPECIFICATIONS

3M™ Particulate Respirator 8577, P95, with Nuisance Level Organic Vapor Relief 80 EA/Case

NIOSH approved for at least 95 percent filtration efficiency against certain oil and non-oil based particles

Carbon layer reduces exposure to nuisance levels of organic vapors

3M™ Cool Flow™ Exhalation Valve reduces heat build-up inside the respirator

Braided headbands and soft inner material provide comfort

SPECIFICATIONS